Weddings, Birthdays, Christmas table names
You can choose a font below. Only choose a font if you want to change from the default. We have 50 fonts listed here, however we have more available. Unfortunately, we cannot add all of them as 50 is the max limit. If you don't like any of them, please send a message to discuss
Wood Types
Don't know what wood type do you want?
These are quick tips about some of the wood types we work with, the better the wood quality for engraving and cutting, the price of the piece wood goes up, unfortunately.
1) MDF
MDF is the cheapest one.
Engrave OK, better for cutting out.
Examples:
2) Radiata plywood
Examples:
A bit more expensive than MDF, however, the full wood sheet may not be consistent. The Radiata plywood has different grades and types. We use non-structural plywood and grade B/C. Which means on the face(B) side it looks neat but some small deformations may appear, on the back(C) side, it can have more deformations and repairs may appear.
Engrave OK, with big pieces it may show differences on the engrave, not consistence, better for cutting out.
3) European poplar
Looks much better than the first 2.
Engrave very well and good for cutting too.
European poplar 3mm is weaker than a MDF 3mm or any other wood type at the same thickness. So, depending on what the product is European poplar 6mm is recommended.
All the matching boards are made European poplar as the main piece. The standard discs are Radiata.
4) Birch plywood
Engrave very well and good for cutting too.
5) Fiji cedar
Engrave very well and good for cutting too.
6) Hoop pine
Engrave very well and good for cutting too.
7) Bamboo - natural and carbonised.
Engrave very well and good for cutting too.
8) Walnut
9) Jarrah
10) Tasmanian Oak
11) Cherry
12) American Walnut
13) Blackwood
More examples/pictures of the engraving on each type of wood will be posted here soon
Weddings, Birthdays, Christmas table names
Weddings, Birthdays, Christmas table names
They are 2.5cm tall, the length will depend on the size of the name.
They are available on coloured acrylic: Black, Red, Pink, Blue, White, Grey and other colours, also in Rose gold mirrored, Silver mirrored and Gold mirrored.
You can chose the font for the names in the Font Selection.
Also, you can send the list of names to sales@tinymemorieslaser.com.au or through our Facebook page/message.
Enter the list of names in the Engraving Text. Note that we just copy and paste the names, so make sure their spelling is correct as any fix required after cutting will add extra cost to your order.
