Christmas bauble decorations - Birch plywood
You can choose a font below. Only choose a font if you want to change from the default. We have 50 fonts listed here, however we have more available. Unfortunately, we cannot add all of them as 50 is the max limit. If you don't like any of them, please send a message to discuss
Wood Types
Don't know what wood type do you want?
These are quick tips about some of the wood types we work with, the better the wood quality for engraving and cutting, the price of the piece wood goes up, unfortunately.
1) MDF
MDF is the cheapest one.
Engrave OK, better for cutting out.
Examples:
2) Radiata plywood
Examples:
A bit more expensive than MDF, however, the full wood sheet may not be consistent. The Radiata plywood has different grades and types. We use non-structural plywood and grade B/C. Which means on the face(B) side it looks neat but some small deformations may appear, on the back(C) side, it can have more deformations and repairs may appear.
Engrave OK, with big pieces it may show differences on the engrave, not consistence, better for cutting out.
3) European poplar
Looks much better than the first 2.
Engrave very well and good for cutting too.
European poplar 3mm is weaker than a MDF 3mm or any other wood type at the same thickness. So, depending on what the product is European poplar 6mm is recommended.
All the matching boards are made European poplar as the main piece. The standard discs are Radiata.
4) Birch plywood
Engrave very well and good for cutting too.
5) Fiji cedar
Engrave very well and good for cutting too.
6) Hoop pine
Engrave very well and good for cutting too.
7) Bamboo - natural and carbonised.
Engrave very well and good for cutting too.
8) Walnut
9) Jarrah
10) Tasmanian Oak
11) Cherry
12) American Walnut
13) Blackwood
More examples/pictures of the engraving on each type of wood will be posted here soon
Christmas bauble decorations - Birch plywood
Christmas bauble decorations - Birch plywoodSize: 8cmH X 6.5cmW X 3mm thick
You can paint them, write on them with normal pencil or permanent markers.
Engrave custom text messages and names on them.
When ordering more than 1 you can enter a list of names(separated by comma or ENTER(line by line)) in the Engraving Text box and add the quantity you want to your cart(e.g 10). You don't need to add one by one except if they will have different font.
